This website requires JavaScript.

Diaphragm CApacity of Beam and block Existing floors (ERIES-DICABE)

Description

The ERIES-DICABE (DIaphragm CApacity of Beam and block Existing floors) project is an experimental programme focused on the seismic in-plane behaviour of existing beam-and-clay block floor diaphragms representative of construction techniques widely adopted in Mediterranean countries prior to the introduction of modern seismic design provisions. A full-scale quasi-static in-plane test on a 9.3 m × 3.9 m floor specimen was carried out at the laboratories of EUCENTRE in Pavia, Italy, while material mechanical characterisation was performed at the Material and Structural Testing Laboratory of the University of Bergamo. The tested system consisted of a traditional beam-and-block configuration with reinforced concrete joists and hollow clay infill units. The study targets the assessment of in-plane deformation capacity, stiffness, and local failure mechanisms under seismic loading conditions, with particular emphasis on realistic geometric and mechanical behaviour. In line with common construction practice in older buildings and to reproduce a critical configuration for diaphragm action, the specimen was built without a concrete topping slab.

The main objectives of the project are:

(i) assessment of the in-plane capacity of beam-and-clay block floors without concrete topping;

(ii) definition of performance levels associated with different damage states in existing diaphragms;

(iii) calibration and improvement of simplified analytical capacity models;

(iv) establishment of a benchmark for advanced finite element modelling approaches;

(v) evaluation of the elastic stiffness of existing floor systems;

(vi) development of demand models and seismic fragility relationships for these floor typologies.

These objectives have been addressed through a combination of material characterisation tests and full-scale quasi-static in-plane tests on the floor system. In addition, complementary numerical and analytical models were developed to support the interpretation of the experimental results and to enhance the understanding of the observed structural behaviour.This experimental programme was a collaborative effort involving the University of Leeds (Leeds, United Kingdom), Università degli Studi di Bergamo (Bergamo, Italy), University of Bristol (Bristol, United Kingdom), Università degli Studi “G. d’Annunzio” Chieti-Pescara (Chieti, Italy), Universidad Nacional Autónoma de México (Ciudad de México, Mexico), ASDEA (Pescara, Italy), and EUCENTRE Foundation (Pavia, Italy).

The experimental campaign of the ERIES-DICABE project was carried out at the EUCENTRE-IUSS Research infrastructure, within the framework of ERIES project (Engineering Research Infrastructures for European Synergies). ERIES is funded by the European Commission's Horizon Europe program, it is coordinated by the Scuola Universitaria Superiore IUSS in Pavia, has a budget of €11.6 million and has a four-year duration, from 2022 to 2026. ERIES aims to provide transnational access to advanced research infrastructures in structural, seismic, wind, and geotechnical engineering. The project seeks to enhance resilience against natural hazards such as earthquakes and extreme winds by fostering innovative and sustainable solutions to mitigate economic losses and social disruptions. Additionally, it develops new technical standards and methodologies to improve infrastructure safety and supports frontier research through international collaboration.

KeywordsBeam-and-clay block floorsFloor diaphragmIn-plane responseFull-scale testSeismic retrofit

Experiment Type

Cyclic test

Experiment Scale

Full scale

How to Cite

When using these data, please cite the dataset (Belleri et al., 2026) and acknowledge the Built Environment Data (BED) Experiments service (Shahnazaryan et al., 2024).

Suggested wording

“This study uses experimental data from the dataset published by Belleri et al. (2026) through the Built Environment Data (BED) Experiments service (Shahnazaryan et al., 2024).”

Dataset

Belleri, A.; Lanese, I.; Nikitas, N. (2026). “Diaphragm CApacity of Beam and block Existing floors (ERIES-DICABE).” Built Environment Data (BED): Experiments, Version 1. https://doi.org/10.60756/euc-w4v0gc80

Platform

Shahnazaryan, D.; Pinho, R.; Crowley, H.; O’Reilly, G. J. (2024). “The Built Environment Data platform for experimental test data in earthquake engineering.” Earthquake Engineering & Structural Dynamics, 53, 4627–4640. https://doi.org/10.1002/eqe.4231

Related research

Paper in progress


Dataset Facility


Year of Experiment

2025-11-28 - 2025-12-04


Date Added

2026-06-17





Downloads


ERIES-DICABE_data.zip: 1.289GB

Download Link

To ensure a smooth downloading experience, we recommend accessing this link from a computer rather than a mobile device

Built Environment Data
The 'Built Environment Data: Experiments' website and web services are developed, maintained and hosted by University of Pavia , in collaboration with EUCENTRE , IUSS Pavia and with technical support from the GEM Foundation .
The work presented in this website has received funding from the European Union's Horizon Europe research and innovation programme under grant agreement No 101058518 (Geo-INQUIRE). The European Commission is not responsible for any use that may be made of the information contained in this website.
©2026 Built Environment Data: Experiments  |  Cookies   |  Privacy Policy